Ridge ventilation
Step, counter and kickout flashing, pipe boots and a ridge vent are installed new which is where most leaks would otherwise start.
Shingle Roofing
Shingle Roof Installation Rutherford, NJ
A roofer in Rutherford can install a new shingle roof from the deck up: drip edge, ice and water shield, underlayment, starter strip, shingles, flashing and ridge vent, so the roof is sealed against wind-driven rain from the start. One call to (551) 380-1579 reaches a nearby roofer who installs shingle roofs.
Shingles are only the top layer of a shingle roof. Underneath sit the drip edge, an ice and water shield along the eaves and in the valleys, underlayment across the deck and a starter strip that seals the first course. Flashing at every wall, chimney, valley and pipe, plus intake and exhaust ventilation, finishes the system.
Shingle choice sets the look, the wind rating and the life of the roof. Flat 3-tab shingles are a single layer with cutouts, while architectural, or dimensional, shingles are laminated from two layers for more thickness, depth and wind resistance. For hail-prone areas there are impact-resistant shingles, and lighter colors can help keep a sunny attic cooler.
Shingles are made for sloped roofs. The usual minimum for shingles is a 2 in 12 pitch, with a double layer of underlayment on slopes up to 4 in 12. A low porch or shed dormer may need a membrane section joined carefully to the shingles.
Many shingle roof installation calls in Rutherford also turn up a need for shingle roof replacement or roof installation.
Looking for Rutherford shingle roof installation? Call (551) 380-1579 and describe the problem to a roofer who works in Rutherford.
Call nowThe process
How shingle roof installation works
A shingle roof is built from the eaves up, layer over layer.
Prepare the deck
On a reroof or new build, the deck is inspected and fixed first, since shingles follow every dip beneath them. A wet deck is never covered.
Ice barrier first
Metal drip edge is fastened at the eaves, and a self-adhering ice barrier covers the eaves and valleys where water and ice collect. That membrane seals around nails where ice backs water up.
Underlayment rows
Synthetic underlayment or felt is rolled out in overlapping rows from the bottom up, then drip edge goes on along the rakes over it. It is the backup layer if wind ever drives water past the shingles.
Set the first course
The starter row seals the bottom edge and rakes of the roof. That is where wind damage usually begins on a poorly built roof.
Install the field
Each course is nailed in the nailing zone, never high or overdriven, and step flashing goes in piece by piece at every sidewall. Valleys are finished open with metal or closed-cut, depending on the shingle and the roof.
Ridge vent
Exhaust at the ridge is matched to intake at the soffits so air moves through the attic. Mixing ridge vents with box vents can short circuit the airflow.
What is included
What a new shingle roof includes
Starter strip
Drip edge and a sealed starter row protect the roof edges so water drips clear of the fascia.
Deck underlayment
A synthetic water barrier goes over every sheet of decking as the second line of defense.
Choosing a shingle
3-tab, architectural or impact-resistant shingles are matched to the house so the look and performance both fit.
Eave membrane
An ice barrier lines the eaves, valleys and other leak-prone spots where ice dams and runoff hit hardest.
Related service
Architectural Shingle Installation Rutherford, NJ
Architectural shingles go on over the same deck, underlayment and starter as any shingle, with their own nailing pattern. The nails must land in the narrow area where the two laminated layers overlap, or the bottom layer can slip and the wind rating is lost. The ridge and hips get thicker cap shingles made for the line, not cut 3-tab pieces.
For Rutherford homeowners, architectural shingle installation has become the default for new roofs. They stand up to wind better than 3-tab, hide small dips in the deck and usually last longer. Look at a few colors on a nearby roof in daylight before deciding.
Related service
Asphalt Shingle Roof Installation Rutherford, NJ
An asphalt shingle roof installation is the most common way to roof a house, and the details decide how well it performs. Most early leaks on new shingle roofs come from flashing, nailing or missing starter, not from the shingles. It is fair to ask which underlayment and ice barrier will go on and where.
For an asphalt shingle roof installation in Rutherford, plan for a few days of work on an average house. In cool months the sealant strips take longer to bond, and the edges get extra attention. Plan around a dry stretch, since the deck should never be covered while wet.
Local help
Shingle Roof Installation Near Me
Around Rutherford, shingle installation covers new builds, garages, additions and full reroofs. From Rutherford out to neighboring towns such as East Rutherford, Wallington, Carlstadt and North Arlington, houses built decades ago tend to need ventilation and flashing upgrades when they get a new shingle roof, and a shingle chosen for local wind and hail makes sense anywhere storms roll through. If you are searching for a shingle roof installer near me, ask what goes under the shingles, not just which shingle goes on top.
Searching for shingle roof installation near me from Rutherford or East Rutherford, Wallington, Carlstadt and North Arlington? Call (551) 380-1579 to talk to a roofer who works in your part of town.
How the weather here affects roofs around Rutherford
Cold winters bring snow, ice and a long stretch of freezing nights. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, which is how ice dams form and back water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. Most homeowners in Rutherford, NJ have the roof checked in the fall and again after the snow melts.
Why call
Why not wait
Smaller repairs
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Roofers who know Rutherford
Local roofers see the same roofs and storm damage across Rutherford and nearby towns.
Straight answers
Ask the roofer about the cause, the options and the estimate before work starts.
Shingle Roof Installation questions
Why does nail placement matter on a shingle roof?
Nailing is what holds shingles down until the sealant bonds and long after. Standard nailing uses four nails, and high-wind areas often require six. Nails set too high miss the course below, and overdriven nails cut the mat, which is how shingles blow off a new roof.
What kind of underlayment should go under shingles?
The layers beneath shingles are drip edge, ice barrier, underlayment and starter strip, in that general order. Synthetic underlayment has largely replaced felt because it is lighter, stronger and less likely to wrinkle or tear. Check that the shingle instructions and local code are both followed.
Can shingles be installed in cold weather?
Warm, dry days give the best results for a shingle install. Cold-weather installs are done regularly, with extra care for brittle shingles and hand sealing where the strips will not activate. Wet decking is the hard stop at any time of year.
Which is better, 3-tab or architectural shingles?
3-tab shingles are a single flat layer with cutouts, while architectural shingles are two laminated layers. Architectural shingles generally have higher wind ratings, last longer and have a textured look, which is why most new roofs use them. 3-tab can make sense on outbuildings or when matching an older roof.
What is the minimum pitch for asphalt shingles?
The usual minimum for shingles is a pitch of 2 in 12. Roofs that are low but still within range get added underlayment protection. Anything flatter needs a membrane roof such as TPO, EPDM or modified bitumen.
More questions? Call (551) 380-1579
Other services that may help
Shingle Roof Replacement
Tearing off a worn shingle roof down to the decking and putting on a new one, with soft decking fixed before anything new goes on.
Learn moreRoof Installation
Putting on a new roof the way the material maker intends, whether it is asphalt shingles, metal or another material.
Learn moreRoof Ventilation
Balancing attic intake and exhaust with soffit vents, ridge vents and attic fans, without mixing vent types that work against each other.
Learn moreGutter Installation
Seamless gutter installation sized to the roof, pitched to the downspouts and hung on hidden hangers, so water ends up where it should.
Learn more
Looking for something else?
See all roofing servicesTalk to a Rutherford roofer about shingle roof installation
Call now for Rutherford shingle roof installation and help in the towns around it.