Custom flashing
All trim in matching color and metal so the roof sheds water at every edge.
Metal Roofing
Metal Roof Installation Rutherford, NJ
A roofer in Rutherford can install a new metal roof in standing seam, exposed fastener panels, metal shingles or stone coated steel, with high-temperature underlayment, matched trim and closures at every edge. Dial (551) 380-1579 to talk with a local roofer about a metal roof.
Metal roofs come in a few distinct systems, and that choice drives everything else. Exposed fastener panels, such as corrugated and ribbed panels, are screwed through the face and go on quickly, but every screw has a washer that will need attention someday. Standing seam panels hide their clips under raised seams, so nothing pierces the flat of the panel and the metal can expand and contract freely.
Metal type and finish matter as much as the profile. Steel with a zinc or aluminum-zinc coating is the standard, while aluminum avoids rust in salty air. A fluoropolymer (PVDF) paint finish holds color longer than a silicone modified polyester finish, and 24 or 26 gauge steel is typical for homes.
The layers below the panels decide how quiet and dry the roof is. Panels normally go over solid sheathing and a heat-rated underlayment, with an ice barrier in the eaves and valleys. Outbuildings may use purlins, but a home usually gets full decking.
Many metal roof installation calls in Rutherford also turn up a need for standing seam metal roof or metal roof replacement.
Looking for Rutherford metal roof installation? Call (551) 380-1579 to talk to a local roofer.
Call nowThe process
The steps of a metal roof installation
A metal roof is measured, ordered and installed as a matched system.
Choose the system
After choosing standing seam, ribbed panels or metal shingles, the roof is measured to order panels and trim. Many panels are made to the exact length of each slope.
Prepare the deck
The old roof is torn off or, where code allows, the metal goes over one layer of shingles with battens or underlayment between. Bad decking telegraphs right through thin metal.
High-heat underlayment
High-temperature synthetic underlayment covers the deck, with ice and water shield at the eaves and valleys where required. A slip sheet may be used to let the metal slide over the underlayment.
Edge flashing
The eaves and valleys get their flashing first so water flows from panel to trim. The order of trim matters because every piece has to lap water downhill.
Install the panels
Panels are set square to the eave and fastened with clips or washered screws in the spots the panel maker specifies. Metal filings are swept off right away so they do not rust stain the finish.
Finish the details
The ridge, walls, chimneys and pipes are flashed, and closures seal the gaps under the trim. On roofs that hold snow, snow guards keep it from sliding off in a sheet.
What is included
A complete metal roof
Panel selection
A panel system matched to the roof pitch chosen to fit the house and budget.
Ridge ventilation
Foam or vented closures seal under the ridge and at the eaves while keeping out rain and pests.
Penetration boots
Snow guards and flexible pipe boots are added where needed so nothing is left to improvised sealant.
High-heat underlayment
An underlayment that tolerates high roof temperatures so it does not stick or break down.
Related service
Metal Roofing Contractor Rutherford, NJ
A metal roofing contractor needs different tools and skills than a shingle crew, from panel benders and seamers to trim brakes for custom flashing. Good questions cover the panel systems they install, the underlayment they use and how they detail valleys and walls.
In Rutherford, a metal roofing contractor should be able to explain the difference between exposed fastener and standing seam in plain terms. Looking at finished roofs is the best way to judge straight panels and clean trim.
Related service
Stone Coated Steel Roof Rutherford, NJ
Stone coated steel roofing looks like traditional roofing but is steel underneath a granular surface. It handles hail and wind well, weighs a fraction of tile and has a quieter surface than bare metal.
The panels often hang on wood battens, which lift them off the deck for airflow. It suits Rutherford homes where heavy tile would need framing upgrades.
Related service
Metal Shingle Roof Rutherford, NJ
Metal shingles are individual interlocking panels shaped like traditional roofing units. They fasten through concealed edges and work well on cut-up roofs.
For Rutherford homeowners who want metal without the look of panels, metal shingles are a common choice. Installation details like starter, valleys and ridge are specific to each product line.
Local help
Metal Roof Installation Near Me
Around Rutherford, metal roofing shows up on new homes, reroofs of older houses, garages and farm buildings. From Rutherford out to neighboring towns such as East Rutherford, Wallington, Carlstadt and North Arlington, shingle roofs are being replaced with standing seam on many houses, and ribbed panels remain common on outbuildings, and a roofer who installs metal regularly will know which system fits each kind of building.
Need metal roof installation around Rutherford? Call (551) 380-1579 for a Rutherford roofer who serves the towns around it too.
What the local climate does to a roof
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, which is how ice dams form and back water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. That is why roof repair in Rutherford is busiest after a hard winter and before the next one.
Why call
Why fix it now
Less damage
Small roof problems caught early usually stay small repairs.
Roofers who know Rutherford
Roofers in Rutherford know the roof types and weather wear common in local homes.
Know what happens next
Ask the roofer about the cause, the options and the estimate before work starts.
Common questions about metal roof installation
What is the lifespan of a metal roof?
Metal roofs often last two or three times as long as asphalt shingles. Coated steel, aluminum and copper all last a long time, with copper and zinc the longest. Salt air, scratches and poor installation shorten that life.
How noisy is a metal roof?
The noise depends on what is under the panels. The loud drumming people remember comes from metal over open purlins on barns and porches. Stone coated steel and metal shingles are among the quietest options.
Is a metal roof more likely to be struck by lightning?
Lightning is drawn by height and location, not by roofing material. Height and isolation decide where lightning hits. Metal is also noncombustible, which helps if a strike does occur.
What gauge of metal roofing should I use?
Metal thickness is listed as gauge, with smaller numbers being thicker. Residential standing seam is usually 24 gauge, and ribbed panels are often 26 or 29 gauge. Ask the roofer which gauge suits your roof and local weather.
What is the difference between exposed fastener and standing seam?
It comes down to whether the screws are visible. Exposed fastener roofs show their screws and need screw maintenance, and standing seam hides its clips and lets the metal move. Many homeowners choose standing seam for houses and exposed fastener for barns and shops.
More questions? Call (551) 380-1579
Often needed together
Standing Seam Metal Roof
Long-lasting standing seam roofs, from snap-lock to mechanically seamed panels, with matching trim, closures and snow guards.
Learn moreMetal Roof Replacement
Replacing a rusted or worn-out metal roof, or swapping an old shingle roof for new metal, with purlins and decking checked before new panels go on.
Learn moreRoof Installation
Putting on a new roof the way the material maker intends, whether it is asphalt shingles, metal or another material.
Learn moreCommercial Metal Roofing
Installing, replacing and repairing metal roofs on warehouses, shops, offices and other commercial buildings, built to handle thermal movement and wind uplift.
Learn more
Looking for something else?
See all roofing servicesNeed metal roof installation in Rutherford, NJ?
Call now for Rutherford metal roof installation and help in the towns around it.