Local roofersFree to callNo forms to fill out
Serving Rutherford and nearby towns
Menu
Call (551) 380-1579
Flat Roofing

TPO Roofing Rutherford, NJ

A local roofing contractor in Rutherford can put a new TPO membrane on a flat roof, giving a reflective, watertight surface that stays cooler than old tar or rolled roofing. Dial (551) 380-1579 to talk through a TPO roof with a local roofer.

A TPO roof is a single sheet of thermoplastic membrane, usually white, laid over rigid insulation on a low-slope deck. Rolls come in several widths and thicknesses, with 60 mil a common middle choice and 80 mil used where the roof sees more wear. What sets TPO apart is the seam: hot air melts the overlapping edges so they fuse into one piece instead of relying on glue or tape.

Most TPO problems trace back to how the roof was put down rather than the membrane itself. A seam welded too cold, a corner patch skipped at a curb or edge metal that was never sealed will leak long before the sheet wears out. Water that ponds for more than a couple of days after rain wears the surface and pushes into any weak spot, so slope to the drains is part of the design.

Depending on what the roofer finds, tpo roofing in Rutherford, NJ can go hand in hand with tpo roof repair and flat roof installation.

Need tpo roofing in Rutherford? Call (551) 380-1579 to reach a nearby roofing contractor.

Call now
The process

The TPO installation process

A TPO roof is built in layers, and each one has a job.

  1. Start with the deck

    A survey of the old roof usually includes a small core cut through the layers to check for trapped moisture and count existing roofs. Since most codes cap a building at two roof layers, the core cut often settles the tear-off question.

  2. Get down to a sound base

    On a tear-off, the crew strips everything to the deck and replaces any sections that are soft or rusted. For a recover over one sound layer, a cover board separates the new membrane from the old surface.

  3. Lay the insulation

    Insulation boards are laid in staggered layers, with tapered sections built to move water off flat spots. Many energy codes require a minimum insulation value when a roof is replaced, so this layer is planned to meet it.

  4. Attach the membrane

    The TPO sheets are rolled out and either mechanically fastened with plates and screws hidden in the seam laps or fully adhered with membrane adhesive. The roofer picks the method based on wind exposure, deck type and whether adhesive odors would bother the people inside.

  5. Fuse the laps

    A robotic hot-air welder runs the long seams and a hand welder does corners and details, fusing the overlapping sheets together. The finished seams are probed by hand so any gap is rewelded before the job is done.

  6. Flash every detail

    Vent pipes, curbs, drains and walls are each flashed with TPO welded to the field sheet. TPO-coated edge metal at the perimeter lets the membrane weld right to the edge.

What is included

What a TPO roof job includes

Insulation boards

Rigid insulation with tapered sections so water moves off instead of ponding.

TPO sheets

Single-ply TPO rolled out across the roof with every seam hot-air welded and probed.

Penetration flashing

Molded boots on pipes and wrapped curbs under equipment instead of caulk that dries out.

Core cut

A core cut or moisture scan of the existing roof so wet insulation does not get buried.

Edge metal

Perimeter metal the membrane can weld to with new drain rings where needed.

Related service

TPO Roof Installation Rutherford, NJ

New TPO roof installation is the cleanest version of the job, since there is no old roof to deal with. The deck, the drain locations and the insulation thickness are set first, then the attachment method is chosen to suit the wind exposure.

Residential TPO installation in Rutherford tends to mean smaller roofs: additions, carports, dormers with little pitch and flat sections behind a parapet. Shingles need a minimum pitch to shed water, so these low sections need a membrane. Where the TPO meets a shingled slope, the transition is flashed so water from above runs over the membrane, not under it.

Related service

TPO Roof Replacement Rutherford, NJ

TPO roof replacement means taking an aging membrane or old flat roof down to a sound base and putting a new TPO system on top. Moisture surveys and core cuts show whether the roof can be recovered or needs a full tear-off. Covering wet insulation is a common shortcut that leads to early failure, so it should be removed.

Recovering over one sound roof avoids hauling the old one away, when the code and the moisture survey allow it. Once a building already has two roof systems, the next roof has to start from the deck.

Related service

PVC Roofing Rutherford, NJ

Like TPO, a PVC roof is a white or light-colored single-ply sheet whose seams are welded with hot air. The difference is in the chemistry: PVC holds up better to grease, oils and many chemicals, which is why it is a common pick for restaurants and buildings with kitchen exhaust on the roof.

PVC and TPO cannot be welded to each other, so repairs and additions have to match the existing membrane. For most Rutherford homes and offices, TPO does the job, and PVC is worth considering over kitchens, labs or anywhere oils land on the roof.

Local help

TPO Roofing Near Me

Around Rutherford, TPO goes on everything from shopping centers to the flat roof over a back porch: low-slope additions, porches, garages and row homes use it as often as offices and stores do. Homes and buildings in Rutherford and around East Rutherford, Wallington, Carlstadt and North Arlington see summer heat, heavy rain and the occasional strong storm, all of which test a flat roof at its seams and drains, so it pays to plan the drainage and the details as carefully as the membrane itself.

Need tpo roofing around Rutherford? Call (551) 380-1579 for a Rutherford roofer who serves the towns around it too.

How the weather here affects roofs around Rutherford

Cold winters bring snow, ice and a long stretch of freezing nights. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, building ice dams that push water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. Most homeowners in Rutherford, NJ have the roof checked in the fall and again after the snow melts.

Why call

Why fix it now

Smaller repairs

A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.

Familiar with local homes

Local roofers see the same roofs and storm damage across Rutherford and nearby towns.

Straight answers

Ask the roofer about the cause, the options and the estimate before work starts.

TPO Roofing questions

Does a white TPO roof save energy?
The white surface reflects a large share of the sun instead of absorbing it. Less heat soaks through to the building, so the space under it can stay cooler in summer. Dirt buildup slowly reduces the effect.
Is a TPO roof good for a house?
Many homes use TPO on flat or nearly flat sections where shingles would leak. It is not meant for steep roofs, where shingles or metal are the better fit. Most residential TPO leaks start at the wall or shingle tie-in, so that detail matters most.
How does TPO compare to EPDM rubber roofing?
Both are proven flat roof membranes with different trade-offs. EPDM is black rubber with adhesive or taped seams, and TPO is a white thermoplastic with welded seams. Welded seams give TPO an edge at the laps, and EPDM is valued for its flexibility and simple repairs.
Do I have to tear off my old flat roof for TPO?
The core cut decides that. TPO can go over one existing roof that is dry and sound, with a cover board between the two. Two existing layers or wet insulation mean a tear-off.
What is the lifespan of a TPO roof?
A well-installed TPO roof commonly lasts somewhere around 15 to 30 years. Thicker membrane, good drainage and limited foot traffic push it toward the long end.

More questions? Call (551) 380-1579

Often needed together

  • TPO Roof Repair

    Repairs for open seams, punctures, failed flashings and wet spots on TPO roofs, without smearing caulk over the problem.

    Learn more
  • Flat Roof Installation

    Flat roof installation from the deck and tapered insulation up to the seams, flashing and edge metal, planned around how the roof will be used.

    Learn more
  • Commercial Roofing

    Roofing for warehouses, offices, retail, churches and apartment buildings, planned around tenants and business hours.

    Learn more
  • Rubber Roof Installation

    EPDM rubber roof installation with the right thickness, attachment method and flashing details, so the roof stays flexible and watertight for decades.

    Learn more

Looking for something else?

See all roofing services

Get tpo roofing help in Rutherford

Call (551) 380-1579 for a local roofer in Rutherford and nearby towns.

Talk to a local roofer(551) 380-1579Call now

Free to call. No forms to fill out.

Call (551) 380-1579